Halloween Washi Tape Light Switch Cover

Add a fun holiday look to a plain light switch cover.

Halloween Washi Tape Light Switch Cover

This is a fun and quick project that can be done in one afternoon. This is also a great project for little ones.

All you need is Washi Tape and a light switch cover, you can even use the one you have all ready, or buy a new nylon cover just for this craft.


Materials:

Washi Tape

Light Switch Cover

Scissors

Screw Driver


Halloween Washi Tape Light Switch Cover

 


Add strips of Washi Tape in any pattern, horizontal, Vertical or Diagonal, you can use a single pattern or create a pattern using different strips of Washi Tape. When you get to the corners, be sure to cut at an angle with your scissors and fold the tape down. Leave at least 1/2 inch of tape on the sides to fold around edge of cover.


When you get to the hole in the center, be sure to cut the middle of the tape and fold down around the sides of the hole.Halloween Washi Tape Light Switch Cover


Add tape until you get to the bottom.

Halloween Washi Tape Light Switch Cover

Poke holes where the screws go with your scissors. This doesn’t need to be cut out completely as the screws just need a little hole to be pushed through.

Halloween Washi Tape Light Switch Cover


Halloween Washi Tape Light Switch Cover

Remove old cover and add new cover. We put ours in the bathroom.

This is a really quick and easy craft that you can do with your little ones, have them add the Washi Tape and you can cut the center and fold down the sides. One of the great things about this is Washi Tape can be removed easily, you could re-decorate the same cover for all the holidays allowing you to make changes each year and for each holiday to the light switch cover.

Leave a Reply

Your email address will not be published. Required fields are marked *